manualshive.com logo in svg

Canon IMAGERUNNER 7095 PRINTER, Руководство по обслуживанию

Поделиться
Скачать
Canon IMAGERUNNER 7095 PRINTER Скачать руководство пользователя страница 57

Chapter 2  

2-10

2.2.4 Mounting the Fixing Assembly

0010-8944

1) Open the front cover.
2) Shift the fixing transport assembly release

lever [1] in the direction of the arrow (left side)
to unlock the transfer/separation charging
assembly.

F-2-18

3) Slide out the fixing transport unit [1] to the

front.

F-2-19

4) Remove the tape [1]; then, remove the tag [2]

of the fixing transport assembly and the
separation release member [3].

Remove all foreign matter (e.g., glue from tape)
from the transport belt.

F-2-20

5) Remove the tape used to keep the tag in place,

and open the delivery assembly [1]; then,
remove the 2 fixing nip release screws [2] from
the front and the rear.

F-2-21

6) Close the delivery assembly.

2.2.5 Mounting the Charging Assembly

0010-8947

1) Remove the screw [2], and detach the transfer/

separation assembly front cover [1].

F-2-22

2) Remove the fixing [1] (1 screw [2]), and

disconnect the connector [3].

F-2-23

[1]

[1]

[1]

[3]

[2]

[1]

[2]

[2]

[1]

[3]

[1]

[2]

Содержание IMAGERUNNER 7095 PRINTER








































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды