manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 96 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 96

Chapter 2  CHANGING SYSTEM SETTINGS 

 

 

2-27

 

Changing the Lockout Setting 

The lockout function is to prevent the preset measurement conditions and system settings 
being changed by other operators. If this function is enabled, the measurement conditions 
and system settings cannot be changed. 

The lockout setting can be changed as explained below. 

♦

 Example: “OFF” 

→

 “ON” (setting the lockout code to “7260”) 

 

1.

  Locate the cursor to “LOCKOUT” by using the rotary knob or the arrow key. 

 

 

2.

 Press 

[ENTER]. 

A selection window will appear. 

 

 

 
 

 

3.

  Locate the cursor to “ON” by using the rotary knob or [

S

] / [

T

]. 

 

*OFF  Disables the lockout function. 

Selectable 

lockout settings 

ON  Enables the lockout function. 

*: Indicates the default setting.

TIP 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments