manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 241 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 241

Chapter 5  EDITING AUTOMATIC SEARCH RESULTS 

 

5-16

 

Displaying the List Edit Window 

This section explains how to display the window by which the event list can be changed. 

 

1.

  Measure the optical fiber and perform auto search. 

 

•

For the method of measuring an optical fiber and performing auto search, refer to 

page 3-56. 

•

For the screen that shows auto search results at the end of measurement, refer to 

page 3-68. 

 

2.

  Press [F1] (SCREEN). 

A selection window will appear. 

 

 

 

 

*: Indicates the default setting.

 

 

 

3.

  Locate the cursor to “LIST” by using the rotary knob or [

S

] / [

T

]. 

4.

 Press 

[ENTER]. 

A new screen will appear. 

 

For the new window, refer to page 3-106. 

*TRACE 

+

 LIST 

LIST 

Selectable screens 

TRACE 

TIP 

Refer 

Refer 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments