manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 44 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 44

Chapter 1  BEFORE USING THE INSTRUMENT 

 

 

1-17

 

Attaching a New Optical Adapter 

 

Refer to the Cautions given on page 1-18. 

 

1.

  Make sure that the power to the instrument is turned OFF. 

  WARNING 

 

Do not replace the optical adapter while the power to the instrument is ON. 

Should the laser emit and enter the eyes, they may be seriously damaged or loss of 
eyesight may result. 

 

 

For the method of turning OFF the power, refer to page 3-107. 

 

2.

  Slide the optical connector cover on the top of the instrument to open it. 

3.

  Insert the new optical adapter straight into the rear shell. 

4.

  Push the optical adapter’s lock lever outward to lock the adapter. 

 

 

 

 

 

 
 

 

 
 

 
 

 

 

Refer 

Refer 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments