manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 356 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 356

Chapter 8  USING OPTIONS AND EXTERNAL DEVICES 

 

8-5

 

Removing 

This section explains procedure of removed options to take printer/FDD unit for example. 

 

1. 

Make sure that the power to the instrument is turned OFF. 

 

  WARNING 

 

Do not remove the printer/FDD unit while the power to the instrument is ON. 

Failure to observe this may result in an electric shock. 

 

For the method of turning OFF the power, refer to page 3-107. 

 

 
 

2.

  Release the tab from the instrument. 

 

 

 

 

 

 

 

 

 

When releasing the tab, take care not to trap your finger. 

 

 
 

3.

  Lift the unit straight to remove it. 

4.

  Attach the cover to the expansion port. 

 

Make sure that the cover is attached. 

 

1

 

2

 

Caution 

Caution 

Refer 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments