YOKOGAWA AQ7260 OTDR User Manual Download Page 79

Page: 79 / 442

Chapter 2 CHANGING SYSTEM SETTINGS

2-10

Changing the Grid Setting

The grid setting can be changed as explained below.

♦

Example: “DISPLAY”

→

“NonDISPLAY”

Locate the cursor to “GRID” by using the rotary knob or the arrow key.

Press

[ENTER].

A selection window will appear.

Locate the cursor to “NonDISPLAY” by using the rotary knob or [

] / [

Press [ENTER] to register the change made to the grid setting.

The change will not be registered if [ESC] is pressed instead of [ENTER].

NonDISPLAY Hides the grid.

Selectable

grid settings

*DISPLAY Shows the grid.

*: Indicates the default setting.

TIP

Caution

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 79 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: