manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 249 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 249

Chapter 5  EDITING AUTOMATIC SEARCH RESULTS 

 

5-24

 

4.

 Press 

[ENTER]. 

A new screen will appear. 

 

For the new screen, refer to page 3-106. 

 

5.

  Locate the cursor to “No.1 Event” by using the rotary knob or [

S

] / [

T

]. 

6.

  Press [F4] (EVENT NOTE EDIT). 

The comment input window will appear, so enter the desired comment. 

 

For the comment input window and the method of entering a comment, refer to 

Chapter 4. 

 

7.

  After the comment is input, press [F5] (DONE). 

The entered comment will appear below the information for event 1. 

 

 

 

 

 

 

 

The event note will be cleared when the power is turned OFF or when the next 

measurement is started. 

 

Refer 

Refer 

TIP 

Caution 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments