manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 308 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 308

Chapter 7  USING USEFUL FUNCTIONS 

 

7-13

 

7.5

 

Using the Label Auto Increment Function 

The label auto increment function allows you to add a number at the end of the label and 
increase the number by one automatically. This function is useful when measuring a 
multi-fiber cable. 

This section explains how to set the label auto increment function. 

 

 

 

 

 

 

 

1.

  Press [MODE] to locate the cursor to “TRACE”. 

 

 

 

2.

  Press [F2] (LABEL). 

A character input window will appear. 

3.

  Press [F3] (FIXED FORM INPUT). 

4.

  Press [F3] (LABEL NUMBER). 

A selection window will appear. 

 

 

 

*: Indicates the default setting. 

 

 

5.

  Locate the cursor to “ON” by using the rotary knob or [

S

] / [

T

]. 

I wonder if I could update 

label number automatically. 

TIP 

*OFF 

Selectable 

settings 

ON 

 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments