manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 429 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 429

Chapter 10  APPENDIX 

 

10-2

 

10.1

 

Software Upgrade 

To support new products or to provide new functions, this instrument allows software 
upgrade. The software can be upgraded by the procedure given below. 

 

Software upgrade can be performed using the following storage mediums. 

 

Floppy disk (expansion unit, USB) 

 USB 

memory 

 PCMCIA 

 

1.  Make sure that the power to the instrument is turned OFF. 

 

For the method of turning OFF the power, refer to page 3-107. 

 

 

2.  Connect the instrument to an AC power outlet. 

 

Software upgrade can be performed only when the instrument is running with AC 

power. 

 

 

3.  Connect a storage medium containing the software to the instrument. 

 

Pleas save the software to root folder in storage media.

 

 

For the method of connecting a storage medium, refer to Chapter 8. 

 

 

Caution 

Refer 

Caution 

Refer 

Caution 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments