manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 127 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 127

Chapter 3  PERFORMING MEASUREMENTS 

 

3-20

 

Changing the Attenuation 

If excessive reflection occurs at the optical connector’s connection point or optical fiber‘s 
break point, the trace may be saturated. To prevent saturation of the trace, attenuation is 
used. 

The attenuation setting can be changed as explained below. 

♦

 Example: “0.00dB” 

→

 “10.00dB” 

 

The attenuation setting cannot be changed if “AUTO RANGE” or “AUTO ATTN” has 

been selected for AUTO SET. 

 

For details on saturation of trace, refer to “Checking the Return Loss” on page 3-87. 

 

1.

  Locate the cursor to “ATTENUATION” by using the rotary knob or the arrow 

key. 

 

 

Caution 

Refer 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments