YOKOGAWA AQ7260 OTDR User Manual Download Page 210

Page: 210 / 442

Chapter 3 PERFORMING MEASUREMENTS

3-103

Changing the File Name

This section explains how to change the comment part of the file name.

•

The file name can consist of up to 43 characters in total.

Comment: 29 characters

No.: 4 characters

Wavelength: 6 characters

Extension: 4 characters

•

The comment cannot be changed if “No.” has been selected as the file name

format.

Press [F2] (COMMENT CHANGE).

A window allowing you to change the comment will appear.

For method of input the character, refer to Chapter 4.

Saving the Data

Press [F4] (EXECUTE) to save the data.

After the data has been saved, the trace mode will be activated.

Caution

TIP

Refer

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 210 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: