YOKOGAWA AQ7260 OTDR User Manual Download Page 211

Page: 211 / 442

Chapter 3 PERFORMING MEASUREMENTS

3-104

Printing the Measured Data

The following three print functions are available.

•

Printing the currently displayed window

•

Printing the trace and event list

•

Printing the event list

Before starting to print, make sure that a printer is connected to the instrument and

correct print settings are made.

•

For the method of connecting a printer, refer to pages 8-3 and 8-16.

•

For the method of changing the printer, refer to pages 8-6 and 8-18.

•

For the method of setting the print direction, refer to page 2-35.

•

For the method of setting the print color, refer to page 2-37.

Printing the Currently Displayed Window

This section explains how to print the currently displayed window.

Press

[PRINT].

Printing will start.

Caution

Refer

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 211 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: