manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 297 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 297

Chapter 7  USING USEFUL FUNCTIONS 

 

7-2

 

7.1

 

Initializing the Vertical-/Horizontal-Axis Scales 

This section explains how to restore the original scale of the trace that has been enlarged, 
reduced or shifted. 

 

 

 

 

 

 

 

1.

  Press [MODE] to locate the cursor to “MARKER”. 

 

 

2.

  Press [F5] (NEXT PAGE). 

3.

  Press [F5] (AUXILIARY FUNCTION). 

4.

  Press [F1] (SCALE INITIALIZE). 

The scales will be initialized. 

 

Both the vertical-axis and horizontal-axis scales will be initialized at the same time. 

 

I wonder if the 

vertical-/horizontal-axis scales 

could be initialized easily. 

TIP 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments