YOKOGAWA AQ7260 OTDR User Manual Download Page 92

Page: 92 / 442

Chapter 2 CHANGING SYSTEM SETTINGS

2-23

Changing the Date/Time Display Format

The date/time display format can be changed as explained below.

♦

Example: “2004.APR.30 12

00”

→

“2004.4.30 12

00”

Locate the cursor to “TYPE” by using the rotary knob or the arrow key.

Press

[ENTER].

A selection window will appear.

The date/time displayed in the selection window is an example only to show how it

will look, not the actual date/time.

The date/time can be changed in the [INPUT] field.

Locate the cursor to “2004.4.30 12:00” by using the rotary knob or [

] / [

APR.30.2004 12:00 Displays the date/time in order of MONTH (alphabet), DAY

and YEAR.

4.30.2004 12:00 Displays the date/time in order of MONTH (numeric), DAY

and YEAR.

30.APR.2004 12:00 Displays the date/time in order of DAY, MONTH (alphabet)

and YEAR.

30.4.2004 12:00 Displays the date/time in order of DAY, MONTH (numeric)

and YEAR.

*2004.APR.30 12:00 Displays the date/time in order of YEAR, MONTH (alphabet)

and DAY.

2004.4.30 12:00 Displays the date/time in order of YEAR, MONTH (numeric)

and DAY.

Selectable

display

formats

NonDISPLAY Hides the date/time.

*: Indicates the default setting.

TIP

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 92 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: