manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 140 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 140

Chapter 3  PERFORMING MEASUREMENTS 

 

 

3-33

 

Changing the Measured Data Auto Saving Conditions 

Changing the Measured Data Auto Saving Setting 

Measured data auto saving is a function to save the acquired data in a specified storage 
media after average measurement was done. 

 

This section explains how to change the measured data auto saving setting. 

♦

 Example: “OFF” 

→

 “ON” 

 

•

For the method to perform an average measurement, refer to page 3-56. 

•

For the method to specify storage media, refer to page 3-88. 

 

 

1.

  Locate the cursor to “AUTO SAVING” by using the rotary knob or the arrow key. 

 

 

The cursor is already at “AUTO SAVING” when measurement condition change 

window appears. 

 
 

2.

 Press 

[ENTER]. 

A selection window will appear. 

 

 

 

*: Indicates the default setting. 

 

 

TIP 

TIP 

ON  Measured data is saved after average 

measurement was done. 

Selectable 

auto saving 

*OFF  Measured data is not saved after average 

measurement was done. 

 

Refer 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments