YOKOGAWA AQ7260 OTDR, User Manual, Page: 164 / 442

Chapter 3 PERFORMING MEASUREMENTS
3-57
•
A message “LASER ON” is displayed during measurement.
•
The following bar showing progress will appear during measurement.
•
Average measurement will end automatically, and “100%” will be displayed when it
is completed successfully.
•
If [AVE] is pressed during measurement, measurement will stop and the progress
of averaging performed so far will be displayed.
•
Time required up to the end of measurement varies with measurement conditions
(distance range, average time).
•
Information such as label and operator’s name can be added to the trace during
measurement.
•
If the event search function has been set to AUTO, an event search is performed
when a measurement is successfully completed.
•
If the measured data auto saving function has been set to ON, the measured data
is saved in a selected storage media when a measurement is successfully
completed.
TIP