YOKOGAWA AQ7260 OTDR User Manual Download Page 73

Page: 73 / 442

Chapter 2 CHANGING SYSTEM SETTINGS

2-4

Changing Settings

This section explains how to change the setting for each parameter.

The system settings are retained in the internal memory even if the instrument is

turned OFF. So, when the instrument is turned ON, the system settings in effect just

before the instrument was turned OFF last time will be restored.

Changing the Display Language

The display language can be changed as explained below.

♦

Example: “ENGLISH”

→

“

日本語

”

Locate the cursor to “LANGUAGE” by using the rotary knob or the arrow key.

The cursor is already at “LANGUAGE” when the setting change window appears.

Press

[ENTER].

A selection window will appear.

日本語

Displays characters in Japanese.

Selectable
languages

* ENGLISH Displays characters in English.

*: Indicates the default setting.

TIP

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 73 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: