YOKOGAWA AQ7260 OTDR, User Manual, Page: 199 / 442

Chapter 3 PERFORMING MEASUREMENTS
3-92
Switching the Folder to Another
This section explains how to change the folder.
Assuming that the selected drive has the following folder structure.
Root 2003
2004 Apr 1-15
16-30
May 1-15
16-31
Jun 1-15
16-30
Jul 1-15
16-31
Aug 1-15
16-31
The method of changing from one folder to another is explained below.
♦
Example: “Root folder”
→
“2004”
→
“Jun”
→
“16-30”
•
Before specifying a folder, make sure that the folder is created using a personal
computer or by this instrument. It is not possible to specify a folder if it is not
created. In this case, the measured data will be saved to the root folder.
•
In the case of the root folder on a storage media that has been initialized by FAT
16, up to 512 files
(*1)
can be stored.
*1:File names must consist of 8 characters (excluding file extension). “512” also
includes the number of folders.
For the method of creating a folder by this instrument, refer to page 6-27.
1.
Locate the cursor to “FOLDER” by using the arrow key.
Caution
Refer