YOKOGAWA AQ7260 OTDR User Manual Download Page 268

Page: 268 / 442

Chapter 6 FILE OPERATION

6-5

Selecting a Folder

Select the desired folder.

For the method of selecting a folder, refer to page 3-92.

Selecting a File Type (Extension)

Select the file type of the file to be recalled.

For the method of selecting a file type, refer to page 3-94.

TIP

Refer

.SOR Displays a list of files saved in the file type that conforms to

Bellcore GR-196-CORE and Telcordia SR-4731.

TRD (AQ7260) Displays a list of files that have been saved by AQ7260.

.SET (Setup) Displays a list of files containing only the measurement

conditions.

.LST (Event List) Displays a list of files containing an event list.

.TRB (AQ7250) Displays a list of files that have been saved by AQ7250.

.TRA (AQ7210/20) Displays a list of files that have been saved by AQ7210/20.

Selectable

file types

.4 (AQ-7140C/D) Displays a list of files that have been saved by AQ-7140C/D.

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 268 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: