manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 137 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 137

Chapter 3  PERFORMING MEASUREMENTS 

 

3-30

 

Changing the Average Method 

Before explaining how to change the setting, an explanation is given below regarding 
average method. 

This instrument allows use of the following three average methods. 

•

 Hi-Speed 

•

 Normal 

•

 Hi-Return 

Hi-Speed

 

This method is used to measure the entire area using the preset attenuation. 

If excessive reflection occurs when the preset attenuation is not appropriate, that part of 
the trace may be saturated. 

 

 

 

 

 

 

 

 

This method is recommended when measuring short optical fiber cables (no 

reflection in the fiber). 

 

For saturation of trace and the method of setting the attenuation, refer to page 

3-87. 

The entire area is measured using the 
preset attenuation. 

There is a possibility that 
this part of the trace is 
saturated depending on 
reflection level. 

 

TIP 

Refer 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments