manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 329 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 329

Chapter 7  USING USEFUL FUNCTIONS 

 

7-34

 

4.

 Press 

[ENTER]. 

A new window will appear. 

 

For details on the window, refer to page 3-106. 

 

5.

  Press [F3] (LIST EDIT). 

A new window will appear. 

 

For details on the window, refer to page 5-17. 

 

6.

  Press [F2] (EVENT FIX). 

A selection window will appear. 

 

 

 

*: Indicates the default setting. 

 

7.

  Locate the cursor to “ON” by using the rotary knob or [

S

] / [

T

]. 

8.

 Press 

[ENTER]. 

The currently displayed event will be set as the master event. 

9.

  Measure a new optical fiber and perform auto search. The information at the 

position at the same distance as the master event will be displayed. 

Refer 

Refer 

TIP 

*OFF 

Selectable event 

fix settings 

ON 

 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments