YOKOGAWA AQ7260 OTDR User Manual Download Page 338

Page: 338 / 442

Chapter 7 USING USEFUL FUNCTIONS

7-43

Displaying the Subtract Trace of Two Traces

Displaying the Subtract Trace

This section explains how to display the subtract trace of two traces (reference trace,
target trace).

The subtract trace cannot be displayed unless the following measurement

conditions are the same for both the reference and target traces.

•

Distance range

•

Sampling resolution

•

Actual data size

Display the traces.

For the method of displaying two or more traces, refer to page 6-3.

Press [F4] (SUBTRACT TRACE)

The subtract trace will be displayed.

*1: If the window (page 3-71) is currently displayed, the subtract trace can be

displayed by pressing [F5] (MULTI TRACE FUNCTION) instead of [F4]
(SUBTRACT TRACE).

The reference and object traces can be changed by pressing [F1] and [F2].

TIP

Refer

Caution

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 338 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: