manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 292 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 292

Chapter 6  FILE OPERATION 

 

6-29

 

7.

  Enter the desired folder name. 

 

The folder name can consist of up to 16 characters. 

 

For the method of entering a folder name, refer to Chapter 4. 

 

8. 

Press [F5] (DONE). 

The folder name is fixed. 

9. 

Press [F5] (EXECUTE). 

The folder is made. 

 

If the specified folder has a sub folder with the same name as the one you are 

going to create, the folder cannot be created. In this case, a message will appear, 

so take necessary steps according the message. 

Caution 

Caution 

Refer 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments