YOKOGAWA AQ7260 OTDR User Manual Download Page 374

Page: 374 / 442

Chapter 8 USING OPTIONS AND EXTERNAL DEVICES

8-23

Operation by using RS-232C

Connecting the Instrument to a Personal Computer

The instrument can be connected to a personal computer using a RS-232C cross

cable. Since the instrument has no RS-232C interface, a USB-to-Serial adapter

must be provided by the user.

•

The following USB-to-Serial adapter must be used.

Manufacturer: I-O Data Device, Inc.

Model Name: USB-RSAQ2 or later.

•

The wiring diagram of cross cable is as follows.

Make sure that the power to both the instrument and computer is turned OFF.

WARNING

Do not connect the computer while the power to the instrument is ON.

Failure to observe this may result in an electric shock.

For the method of turning OFF the power, refer to page 3-107.

Caution

TIP

Refer

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 374 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: