YOKOGAWA AQ7260 OTDR User Manual Download Page 279

Page: 279 / 442

Chapter 6 FILE OPERATION

6-16

Selecting a Print Object

The print object can be changed as explained below.

♦

Example: “TRACE

LIST”

→

“TRACE”

The print object cannot be changed if “.LST” has been selected as the file type.

10.

Locate the cursor to “PRINT OBJECT” by using the arrow key.

11.

Press [ENTER].

A selection window will appear.

*: Indicates the default setting.

12.

Locate the cursor to “TRACE” by using the rotary knob or [

] / [

13.

Press [ENTER] to register the change made to the print object setting.

Caution

TIP

*TRACE

LIST Prints both the trace and event list.

TRACE Prints the trace only.

Selectable

objects

LIST Prints the event list only.

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 279 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: