manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 18 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 18

SAFETY PRECAUTIONS 

 

XVII

 

Other Precautions 

Notes on Backup Battery 

  CAUTION 

 

The instrument uses a lithium battery for memory backup. The instrument may malfunction 
suddenly due to battery life, therefore, early replacement of the battery is recommended. 

The life of the battery is approximately five years. 

 

For details on replacement of the backup battery, refer to page 1-25. 

 

 

Notes on LCD Panel 

  CAUTION 

 

This instrument uses a liquid crystal display panel. The display panel gradually becomes 
unclear due to the backlight life. The LCD panel needs to be replaced when it becomes 
unclear. 

The life of the LCD panel is approximately three years. 

Please contact the agent when the panel is no longer clear. 

Refer 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments