YOKOGAWA AQ7260 OTDR User Manual Download Page 205

Page: 205 / 442

Chapter 3 PERFORMING MEASUREMENTS

3-98

Changing the ID No.

The No. is used in combination with the SUB No. described in the next section.

For the description on the increment of No., refer to page 3-100.

This section explains how to change the main No. attached to a file name.

♦

Example: “000”

→

“003”

No. cannot be changed if “COM” has been selected as the file name format.

Locate the cursor to “ID No.” by using the arrow key.

Press

[ENTER].

A selection window will appear.

*: Indicates the default setting.

TIP

Selectable

ID No.

* 000

999

(1 step)

Caution

Refer

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 205 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: