YOKOGAWA AQ7260 OTDR User Manual Download Page 102

Page: 102 / 442

Chapter 2 CHANGING SYSTEM SETTINGS

2-33

Changing the LCD Brightness

Ease of reading the LCD display varies considerably with its brightness.

The LCD brightness can be changed as explained below.

♦

Example: “NORMAL”

→

“DARK”

In general, each brightness mode has the following features.

BRIGHT

The screen is easy to see when the surroundings are dark.

However, this mode consumes a lot of power.

When using the instrument by the battery pack only, always pay attention to the

remaining power of the battery pack.

DARK

The screen is a little difficult to see, but sufficient even when the surroundings are

dark.

When operating the instrument by the battery pack only, it can be operated

continuously and longer than “BRIGHT”.

Locate the cursor to “LCD BRIGHTNESS” by using the rotary knob or the arrow

key.

TIP

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 102 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: