manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 174 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 174

Chapter 3  PERFORMING MEASUREMENTS 

 

 

3-67

 

Shifting the Trace 

The currently displayed trace can be shifted as explained below. 

 

1.

  Press [SCALE] to highlight the display start level (dB)/display start distance 

(km). 

 

 

 

The following items will be highlighted alternately each time [SCALE] is pressed. 

 

 

 

Display start level (dB)/display start distance (km) 

 

 

Vertical-axis scale (dB/Div)/horizontal-axis scale (km/Div) 

 

 

 

2.

  Use the arrow keys to shift the trace. 

Press [

S

]:  Shifts the trace downward. 

Press [

T

]:  Shifts the trace upward. 

Press [

W

]:  Shifts the trace to the left. 

Press [

X

]:  Shifts the trace to the right. 

 

This trace shift function is effective only if the trace is currently enlarged. 

 

The trace is shifted by turned rotary knob to same direction continuously after 

cursor is moved to the left end or the right end when the trace is enlarge. 

Caution 

TIP 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments