manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 259 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 259

Chapter 5  EDITING AUTOMATIC SEARCH RESULTS 

 

5-34

 

Changing the Fault Event Show/Hide Setting 

The fault event show/hide setting can be changed as explained below. 

♦

 Example: “DISPLAY” 

→

 “NonDISPLAY” 

 

For details on fault event, refer to page 3-68. 

 

1.

  Locate the cursor to “FAULT EVENT” by using the rotary knob or the arrow key. 

 

 

2.

 Press 

[ENTER]. 

A selection window will appear. 

 

 

 

 

*: Indicates the default setting.

 

 

For the method of displaying fault events, refer to page 3-68. 

 

3.

  Locate the cursor to “NonDISPLAY” by using the rotary knob or [

S

] / [

T

]. 

4.

  Press [ENTER] to register the change made to the fault event show/hide setting. 

Refer 

*DISPLAY  Performs auto search and displays noticeably the fault 

events if any. 

Selectable fault 

event settings 

NonDISPLAY  Performs auto search, and handles fault events as normal 

events and displays them. 

 

TIP 

Refer 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments