manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 125 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 125

Chapter 3  PERFORMING MEASUREMENTS 

 

3-18

 

Changing the Pulse Width 

The pulse width can be changed as explained below. 

♦

 Example: “100ns” 

→

 “200ns” 

 

The pulse width cannot be changed if “AUTO RANGE” has been selected for AUTO 

SET. 

 

The pulse width has the following features. 

•

Short pulse width: Enables measurement with high spatial resolution, but not 

measurement at long distances. 

•

Long pulse width: Enables measurement at long distances, but not measurement 

with high spatial resolution. 

 

1.

  Locate the cursor to “PULSE WIDTH” by using the rotary knob or the arrow key. 

 

 

Caution 

TIP 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments