manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 328 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 328

Chapter 7  USING USEFUL FUNCTIONS 

 

7-33

 

7.8

 

Using the Event Fix Function 

When a master event is created and auto search is performed for the measured trace, this 
event fix function displays the information for the same distance as the master event. 

This function is useful for measurements like measurement of multi-fiber cables, in which 
the distances to the events occurring in each fiber are expected to be the same. 

This section explains how to create a master event and how to use it. 

 

 

 

 

 

 

 

1.

  Measure the optical fiber and perform auto search. 

 

•

For the method of measuring an optical fiber and performing auto search, refer to 

page 3-56. 

•

For the window that shows auto search results at the end of measurement, refer 

to page 3-68. 

 

 
 

2.

  Press [F1] (SCREEN). 

A selection window will appear. 

 

 

 

 

*: Indicates the default setting. 

 
 

3.

  Locate the cursor to “LIST” by using the rotary knob or [

S

] / [

T

]. 

I wonder if I could get 

information at the same 

distance every time. 

Refer 

TIP 

*TRACE 

+

 LIST 

LIST 

Selectable 

screens 

TRACE 

 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments