YOKOGAWA AQ7260 OTDR User Manual Download Page 335

Page: 335 / 442

Chapter 7 USING USEFUL FUNCTIONS

7-40

Displaying Multiple Traces

The following two methods are available to display multiple traces.

•

By recalling multiple files

•

By displaying a new trace while displaying the current trace

•

By making a measurement continuously on multiple wavelengths

This section explains how to display a new trace while displaying the current trace.

•

Display example (Four traces display)

Displayed information (file name, measurement conditions, etc) is for current trace.

•

When [F3] (SCALE CHANGE) is selected current trace, operations for

enlarge/reduce and sift of trace are as follows.

Enlargement/reduction (horizontal)

: Takes effect on the multi traces

Shift (horizontal)

: Takes effect on the multi traces.

Enlargement/reduction (vertical)

: Takes effect on the multi traces.

Shift (vertical)

: Takes effect on the current traces.

TIP

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 335 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: