YOKOGAWA AQ7260 OTDR User Manual Download Page 349

Page: 349 / 442

Chapter 7 USING USEFUL FUNCTIONS

7-54

Locate the cursor to “SM 1.55µm” by using the rotary knob or arrow key.

Press [ENTER] .

" * " is displayed.

•

Check to make sure that "*" is added to the traces 1.31µm and 1.55µm.

•

Please set group index and back scatter level of each wavelength as the need

arises.

Press [F4] (DONE) to register the changes made to the multi wl measurement

conditions.

10.

Press [F4] (DONE) to register the changes made to the measurement

conditions.

11.

Press [AVE]

Measurements are made sequentially starting from the shorter one.

・

Sample measurement sequence

1. Measurement with the wavelength 1.31µm

2. Event search performed after measurement completed*

3. Measurement data saved*

4. Measurement with the wavelength 1.55µm

5. Event search performed after measurement completed*

6. Measurement data saved*

*: Performed only when the event search and auto saving functions have been set

to ON.

・

The number of the file name is used commonly for two wavelength.

TIP

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 349 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: