YOKOGAWA AQ7260 OTDR User Manual Download Page 117

Page: 117 / 442

Chapter 3 PERFORMING MEASUREMENTS

3-10

Displaying the Measurement Condition Change Window

This section explains how to display the window by which the measurement conditions
can be changed.

Make sure there is no measurement currently in progress.

If measurement is in progress, some items cannot be changed.

Press [MODE] to locate the cursor to “TRACE”.

Press [F1](MEASURE CONDITION).

The following conditions can be changed using [F1] to [F4].

•

Wavelength

•

Distance

range

•

Pulse

width

•

Attenuation

•

The distance range, pulse width and attenuation cannot be changed if “AUTO

RANGE” has been selected for AUTO SET.

•

The attenuation cannot be changed if “AUTO ATTN” has been selected for AUTO

SET.

For details on measurement condition auto setting, refer to page 3-14.

Caution

Refer

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 117 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: