manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 382 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 382

Chapter 8  USING OPTIONS AND EXTERNAL DEVICES 

 

8-31

 

Connecting the Instrument to a Personal Computer 

 

The instrument can be connected to a personal computer using a GP-IB PC card 

(PCMCIA) and cable.

 

 

Please use following GP-IB cards. 

Manufacturer: CONTEC 

CO., 

LTD. 

Model Name: 

GP-IB (CB) F 

 

 

1.

  Make sure that the power to both the instrument and computer is turned OFF. 

For the method of turning OFF the power, refer to page 3-107. 

 

 

2.

  Open the cover on the top of the instrument. 

3.

  Attach GP-IB PC card to this instrument. 

 

For the procedure of attaching GP-IB card, refer to page 8-13. 

 

4.

  Connect cable to personal computer. 

 

Caution 

TIP 

Refer 

Refer 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments