YOKOGAWA AQ7260 OTDR User Manual Download Page 327

Page: 327 / 442

Chapter 7 USING USEFUL FUNCTIONS

7-32

Press [F2] (DISTANCE REFERENCE SET).

The cursor position will be set as the distance reference.

“REF” will be displayed at the left edge of the window.

•

All the distance data will be re-calculated based on the new distance reference.

•

Carrying out step 4 with the distance reference set will restore the connection

point between the instrument and optical fiber as the distance reference.

•

The mark shape of the distance reference can be changed.

•

If auto search is executed with the distance reference set, events present after the

distance reference will be detected.

For the method of changing the distance reference mark, refer to page 2-19.

TIP

Refer

Caution

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 327 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: