YOKOGAWA AQ7260 OTDR User Manual Download Page 13

Page: 13 / 442

SAFETY PRECAUTIONS

XII

Notes on Installation

For Personnel Performing Installation

WARNING

Do not connect the instrument to an AC outlet using an extension power cord.

Doing so may result in heat generation or fire.

CAUTION

Do not dissemble or modify the instrument.

Doing so may result in electric shock, fire or accident.

Do not expose the instrument to water splashes.

Failure to observe this may result in electric shock, fire or accident.

Do not allow the terminals to short-circuit.

Failure to observe this may result in fire or breakdown.

When using an AC adapter, make sure that it is inserted into the AC outlet properly.

If the power plug comes into contact with metal objects, fire or electric shock may result.

When carrying out work with the instrument on your shoulders, take care not to let it drop.

Failure to observe this may result in injury or breakdown.

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 13 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: