manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 305 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 305

Chapter 7  USING USEFUL FUNCTIONS 

 

7-10

 

For Traces that Have Not Been Auto Searched 

 

For the window that is displayed just after measurement is finished (without auto 

search), refer to page 3-71. 

 

 

1.

  Press [MODE] to locate the cursor to “MARKER”. 

 

 

 

2.

  Press [F5] (NEXT PAGE). 

3.

  Press [F5] (AUXILIARY FUNCTION). 

4.

  Press [F5] (CURSOR LINK). 

A selection window will appear. 

 

 

 

*: Indicates the default setting. 

 
 

5.

  Locate the cursor to “ON” by using the rotary knob or [

S

] / [

T

]. 

6.

 Press 

[ENTER]. 

The cursor link function will be enabled and “LNK” will be displayed at the left edge of 
the window. 

 

For details on “LNK”, refer to page 1-36. 

 

 

7.

  Turn the rotary knob to move the cursor. 

As the cursor moves, all the markers will move accordingly. 

Refer 

Refer 

TIP 

*OFF 

Selectable 

cursor link 

ON 

 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments