manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 301 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 301

Chapter 7  USING USEFUL FUNCTIONS 

 

7-6

 

For Traces that Have Not Been Auto Searched 

 

For the window that is displayed just after measurement is finished (without auto 

search), refer to page 3-71. 

 

 

 

1.

  Press [MODE] to locate the cursor to “MARKER”. 

 

 

 

 

2.

  Press [F5] (NEXT PAGE). 

3.

  Press [F5] (AUXILIARY FUNCTION). 

4.

  Press [F3] (APPROX. LINE). 

A selection window will appear. 

 

 

 

*: Indicates the default setting. 

 

 

 

5.

  Locate the cursor to “DISPLAY” by using the rotary knob or [

S

] / [

T

]. 

6.

 Press 

[ENTER]. 

An approximate line will appear. 

 

No approximate line will appear if no markers have been set. 

 

Refer 

Caution 

TIP 

*NonDISPLAY  Hides the approximate line. 

Selectable 

approximate line setting 

DISPLAY  Shows the approximate line. 

 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments