YOKOGAWA AQ7260 OTDR User Manual Download Page 43

Page: 43 / 442

Chapter 1

BEFORE USING THE INSTRUMENT

1-16

1.6

Replacing the Optical Adapter

This section explains how to replace the optical adapter with a new one.

Removing the Optical Adapter

Refer to the Cautions given on page 1-18.

Make sure that the power to the instrument is turned OFF.

WARNING

Do not replace the optical adapter while the power to the instrument is ON.

Should the laser emit and enter the eyes, they may be seriously damaged or loss of
eyesight may result.

For the method of turning OFF the power, refer to page 3-107.

Slide the optical connector cover on the top of the instrument to open it.

Push the optical adapter’s lock lever inward to unlock the adapter.

Lift the adapter to pull it out.

Lock lever

Front shell

Cover of
optical fiber
cable connector

Refer

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 43 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: