manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 51 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 51

Chapter 1 

BEFORE USING THE INSTRUMENT

 

 

1-24

 

For the method of removing the battery pack, refer to page1-19. 

 

1.

  Make sure that the power to the instrument is turned OFF. 

 

For the method of turning OFF the power, refer to page 3-107. 

 

2. 

With the battery pack installed in the instrument, connect the AC adapter to the 

instrument. 

 

•

For the method of attaching the battery pack, refer to page 1-21. 

•

For the method of connecting the AC adapter, refer to page 3-4. 

 

3.

  Insert the AC adapter’s power plug into an AC power outlet. 

Charging of the battery pack will start. 

  CAUTION 

 

 

Do not insert the AC adapter’s power plug into an AC power outlet if the power to the 
instrument is ON. 

Failure to observe this may result in breakdown. 

 
 

The CHARGE LED will be lit steadily while the battery pack is charged, and will go 

out when charging is complete. 

 

Refer 

Refer 

Refer 

TIP 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments