YOKOGAWA AQ7260 OTDR User Manual Download Page 15 | Manualshive

Page: 15 / 442

YOKOGAWA AQ7260 OTDR User Manual Download Page 15

SAFETY PRECAUTIONS

XIV

Prohibited Items Regarding Installation Method

WARNING

Do not place heavy objects on the power cord, heat or pull it, and do not modify the power
cord.

Doing so may damage the cord, resulting in fire or electric shock.

CAUTION

Before transferring the instrument to another site, make sure that the power plug is
removed from the AC outlet and all the external connecting cables are disconnected.

Failure to observe this may damage the cord, resulting in fire or electric shock.

Notes on Handling

The instrument must be handled according to the procedures given in this manual.

Warning marks (“WARNING”, “CAUTION”) must be strictly observed.

WARNING

Do not leave metal objects or containers of liquid, such as water, near the instrument.

Strong wind may turn over the container spilling the water or cause metal objects to hit the
instrument, resulting in fire, electric shock or breakdown.

Do not modify the power cord, bend, twist or pull it excessively.

Failure to observe this may result in fire or electric shock.

Before plugging in or removing connectors from the instrument, make sure that the
instrument is powered OFF.

Failure to observe this may result in fire, electric shock or breakdown.

Do not disassemble or modify the instrument.

Doing so may result in fire, electric shock or accident.

Do not allow the terminals of the battery pack to get wet.

Failure to observe this may result in rust, fire or electric shock.

«
...
13
14
15
16
17
...
»

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments