manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 272 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 272

Chapter 6  FILE OPERATION 

 

6-9

 

Selecting a Folder 

 

6.

  Select the desired folder. 

 

For the method of selecting a folder, refer to page 3-92. 

 

 
 

 

Selecting a File Type (Extension) 

 

7.

  Select the file type of the file to be deleted. 

 

For the method of selecting a file type, refer to page 3-94. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Refer 

Refer 

TIP 

.SOR  Displays a list of files saved in the file type that conforms 

to Bellcore GR-196-CORE and Telcordia SR-4731. 

.TRD (AQ7260)  Displays a list of files that have been saved by AQ7260. 

.SET (Setup)  Displays a list of files containing only the measurement 

conditions. 

.LST (Event List)  Displays a list of files containing an event list. 

.BMP (Image)  Displays a list of files that have been saved in BITMAP 

format. 

.TIF (Image)  Displays a list of files that have been saved in TIFF 

format. 

.CSV  Displays a list of files that have been saved in CSV 

format. 

Selectable 

file types 

*.* (All)  Displays a list of the files stored in the specified folder. 

 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments