manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 336 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 336

Chapter 7  USING USEFUL FUNCTIONS 

 

7-41

 

•

 For the method of recalling multiple files, refer to page 6-3. 

•

 For the method to make a measurement continuously on multiple wavelengths, 

refer to page 7-52. 

 

 
 

1.

  Display a trace. 

Perform measurement or recall one file to display the window that is displayed before 
Auto search. 

 

For details on the window, refer to page 3-71. 

 
 

 

2.

  Press [F4] (TRACE FIX). 

A selection window will appear. 

 

 

 

*: Indicates the default setting. 

 

 
 

3.

  Locate the cursor to “ON” by using the rotary knob or [

S

] / [

T

]. 

4.

 Press 

[ENTER]. 

The current trace will be fixed. 

 

The color of the trace will change if the display color is not currently set to “B&W”. 

 

For the method of changing the display color, refer to page 2-22. 

TIP 

Refer 

Refer 

Refer 

TIP 

*OFF 

Selectable trace 

fix settings 

ON 

 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments