YOKOGAWA AQ7260 OTDR User Manual Download Page 431

Page: 431 / 442

Chapter 10 APPENDIX

10-4

The following window appears when software upgrade is complete.

7. Remove the storage medium and press [F1].

The instrument will be restarted automatically.

According to the version of the current software, Procedure 6 and 7 should have to

be done again.

The software version displays in starting screen as below..

AQ**** : Displays model name of mounted optical modules.

It does not display anything, when the instrument does not mount

optical module.

#.## :

Displays software version of installed.

Update is now completed.

Please pull out the medium

→

Push F1.

TIP

UNIT : AQ****
SOFT Ver : #.##

Caution

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Search results

Summary of Contents for AQ7260 OTDR

Reviews:

YOKOGAWA AQ7260 OTDR, User Manual, Page: 431 / 442

Search results

Summary of Contents for AQ7260 OTDR

Reviews: