manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 212 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 212

Chapter 3  PERFORMING MEASUREMENTS 

 

 

3-105

 

Printing the Trace and Event List 

This section explains how to print both the measured trace and information on the events 
detected by auto search. 

 

The trace and event list can be printed only if auto search has been performed. 

 

1.

  Display a window showing the trace and event list. 

 

For the method of displaying the trace+event list window, refer to page 3-68. 

 

2.

  Press [F5] (TRACE

+

LIST PRINT). 

Printing will start. 

 

 

 

Printing the Event List 

This section explains how to print only the information regarding the events detected by 
auto search. 

 

The event list can be printed only if auto search has been performed. 

 

1.

  Display a window showing the trace and event list. 

 

For the method of displaying the trace+event list window, refer to page 3-68. 

Caution 

Caution 

Refer 

Refe

 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments