manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 294 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 294

Chapter 6  FILE OPERATION 

 

6-31

 

4.

  Select the drive that contains the folder to be copied. 

 

For the method of selecting a drive, refer to page 3-91. 

 

5.

  Select the folder to be copied. 

 

For the method of specifying a folder, refer to page 3-92. 

 

6.

  Select the drive to which the folder is to be copied. 

 

For the method of selecting a drive, refer to page 3-91. 

 

7.

  Select the copy destination folder. 

 

The copy source folder will be copied as a sub folder of the selected folder. 

 

For the method of specifying a folder, refer to page 3-92. 

 

8.

  Press [F5] (EXECUTE) to create the specified folder. 

 

If the copy destination folder has a folder with the same name as the copy source 

folder, copy will not be performed. In this case, a message will appear, so take 

necessary steps according the message. 

 

Caution 

TIP 

Refer 

Refer 

Refer 

Refer 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments