manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 367 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 367

Chapter 8  USING OPTIONS AND EXTERNAL DEVICES 

 

8-16

 

USB Printer 

 

The following USB printers available to use this instrument at present. 

Hewlett Packard 

•

 Deskjet5160 

•

 Deskjet5740 

EPSON 

•

 PX-V500 

•

 Stylus C45 

 

Connecting 

A USB printer can be connected to the instrument as explained below. 

 

The instrument allows two USB printers to be connected, but it cannot recognize 

them together. So only one USB printer must be connected. If two USB printers are 

connected, their operation will not be guaranteed. 

 

A USB printer can be connected even if the power to the instrument is currently 

ON. 

 

1.

  Open the cover on the top of the instrument. 

 

Caution 

TIP 

Caution 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments