manualshive.com logo in svg

YOKOGAWA AQ7260 OTDR, User Manual, Page: 189 / 442

Share
Download
YOKOGAWA AQ7260 OTDR User Manual Download Page 189

Chapter 3  PERFORMING MEASUREMENTS 

 

3-82

 
6-Point Method

 

The 6-point method allows you to check splice loss for the desired events using six 
markers. 

The distance from the previous event can be found by performing this method. 

In this explanation, it is assumed that four markers (

1

 to 

3

, Y2) have already been set. 

 

 

For the method of setting four markers, refer to page 3-78. 

 

 
 

1.

 Move 

1

. 

1-1. Locate the cursor to the event just before the current one by turning the 

rotary knob. 

 

For the position for marker 

1

, refer to page 3-84. 

 
 

1-2. Press [F1] (

1

). 

The position of marker 

1

 will move. 

 
 

 

 
 

 

 
 

 

 
 

 
 

TIP 

Refer 

Summary of Contents for AQ7260 OTDR



























































































































































































































































































































































































































































Reviews:

No comments